...
Check your username here: https://allocations.access-ci.org/profile
You will see the “Pittsburg “Pittsburgh Supercomputing Center” username.
...
Code Block |
---|
[maor@bridges2-login014 ~]$ salloc -N 1 -p RM salloc: Pending job allocation 5062923 salloc: job 5062923 queued and waiting for resources salloc: job 5062923 has been allocated resources salloc: Granted job allocation 5062923 salloc: Waiting for resource configuration salloc: Nodes r352 are ready for job [maor@r352 ~]$ ibstat CA 'mlx5_0' CA type: MT4123 Number of ports: 1 Firmware version: 20.30.1004 Hardware version: 0 Node GUID: 0x9440c9ffffac407c System image GUID: 0x9440c9ffffac407c Port 1: State: Active Physical state: LinkUp Rate: 200 Base lid: 636 LMC: 0 SM lid: 35 Capability mask: 0x2651e848 Port GUID: 0x9440c9ffffac407c Link layer: InfiniBand [maor@r352 ~]$ lscpu Architecture: x86_64 CPU op-mode(s): 32-bit, 64-bit Byte Order: Little Endian CPU(s): 128 On-line CPU(s) list: 0-127 Thread(s) per core: 1 Core(s) per socket: 64 Socket(s): 2 NUMA node(s): 2 Vendor ID: AuthenticAMD CPU family: 23 Model: 49 Model name: AMD EPYC 7742 64-Core Processor Stepping: 0 CPU MHz: 3335.192 BogoMIPS: 4491.35 Virtualization: AMD-V L1d cache: 32K L1i cache: 32K L2 cache: 512K L3 cache: 16384K NUMA node0 CPU(s): 0-63 NUMA node1 CPU(s): 64-127 Flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm constant_tsc rep_good nopl nonstop_tsc cpuid extd_apicid aperfmperf pni pclmulqdq monitor ssse3 fma cx16 sse4_1 sse4_2 movbe popcnt aes xsave avx f16c rdrand lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt tce topoext perfctr_core perfctr_nb bpext perfctr_llc mwaitx cpb cat_l3 cdp_l3 hw_pstate ssbd mba ibrs ibpb stibp vmmcall fsgsbase bmi1 avx2 smep bmi2 cqm rdt_a rdseed adx smap clflushopt clwb sha_ni xsaveopt xsavec xgetbv1 xsaves cqm_llc cqm_occup_llc cqm_mbm_total cqm_mbm_local clzero irperf xsaveerptr wbnoinvd arat npt lbrv svm_lock nrip_save tsc_scale vmcb_clean flushbyasid decodeassists pausefilter pfthreshold avic v_vmsave_vmload vgif umip rdpid overflow_recov succor smca [maor@r352 ~]$ |
Installing and using HPC-X
View file | ||
---|---|---|
|
Download the above file.
tar xjfp hpcx-2.13.1.tbz
module use <path to hpcx-2.13.1>/modulefiles
module load hpcx
which mpirun