...

The list of necessary dependencies to install and compile can be found under https://seissol.readthedocs.io/en/latest/compiling-seissol.html (TODONOTE: The the installation in the home directory, as described there, is outdated. We suggest setting an environment variable SEISSOL_PREFIX to a local location and then setting -DCMAKE_INSTALL_PREFIX=$SEISSOL_PREFIX in CMake for all the dependencies installation.). In particular, you will need to install:

...

You will also need to set the DEVICE_ARCH and DEVICE_BACKEND parameters for GPUs.

Testing Your Installation

...

To test your installation, you can do so within two stepsthings:

• Run SeisSol_proxy_Release_ARCH 100000 100 all . This command will give you an idealized performance figure and run through all kernels once, thus also verifying that they run through without error.

• Run SeisSol_Release_ARCH with a parameter file. We provide reference values for all some test scenarios in the https://github.com/SeisSol/precomputed-seissol repository , which you could use to test can compare your installation to. See the description below on how to do that.

Pinning and Performance Considerations

...

export SEISSOL_COMMTHREAD=1 # Test with both 1 and 0 for the test run. Check which gives higher performance and use that one.
THREADS_PER_TASK=16 # Guidance, but you can change this parameter
CPU_HYPERTHREADING=1 
NUM_CORES=$(expr $CPUS_PER_TASK / $CPU_HYPERTHREADING)
NUM_COMPUTE_CORES=$(expr $NUM_CORES - $SEISSOL_COMMTHREAD)
export OMP_NUM_THREADS="$(expr $NUM_COMPUTE_CORES \* $CPU_HYPERTHREADING)"
export OMP_PLACES="cores($NUM_COMPUTE_CORES)"
export PROC_BIND=spread
export MP_SINGLE_THREAD=no
unset KMP_AFFINITY

...

Test Run

After having successfully compiled SeisSol, we test our installation as the next step. For that, clone the pre-computed solutions by running

git clone https://github.com/SeisSol/precomputed-seissol.git

This directory has a collection of pre-computed scenarios for testing whenever a new feature is implemented. Here, we will run the tpv33 test case; hence navigate to the tpv33 directory in the downloaded precomputed-seissol repository.

Inside, you will find the mesh file required to simulate the case. To run SeisSol, simply set the pinning variables as described in the previous section. Then, run SeisSol with the desired communicator size:

mpirun -n $NUM_RANKS $PATH_TO_SEISSOL_BIN/SeisSol_Release_ARCH parameters.par

This will start the simulation—and SeisSol will print some terminal info while running it.

Once the simulation is done, the folder output should contain the results of the simulation. To verify the correctness of your installation, can compare these results with the pre-computed folder. For that, either use paraview to visualize one of the Xdmf files in both scenarios or use viewrec (https://github.com/SeisSol/SeisSol/tree/master/postprocessing/visualization/receiver/bin ) to visualize the point receivers (the txt files), and compare the results for both output folders.

For background information, the description of the scenario can be found here: https://strike.scec.org/cvws/download/TPV33_Description_v04.pdf .

Tasks and Submissions

1. Run the application on 4 CPU nodes and submit the results.
   Experiment with SEISSOL_COMMTHREAD=0 and SEISSOL_COMMTHREAD=1 . Show the differences in the team presentation, submit the best results to the team folder.
   
   The simulation files are placed here:

   View file
   name Turkey (for Benchmark).zip

2. Run MPI Profiler to profile the application. Which 3 MPI calls are mostly used?

...

1. Present your work in the team interview ppt slides.

3. Visualize the results, and create a short video demonstrating the input via Paraview or any other tool. With this input (EndTime = 150).

4. <TBD>

...