Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 2 Next »

To get access you will need a username and Initial password that will be sent to you. 

Quickstart for Niagara and Mist documentation page can be found here:

$ ssh -Y lclmaoroph@niagara.scinet.utoronto.ca
Warning: Permanently added 'niagara.scinet.utoronto.ca' (RSA) to the list of known hosts.
Password: 
===============================================================================
SciNet welcomes you to the NIAGARA supercomputer.

This is a Niagara login node. Use this node to develop and compile code,
to run short tests, and to submit computations to the scheduler.

Remember that /scratch is never backed-up.

Documentation: https://docs.scinet.utoronto.ca/index.php/Niagara_Quickstart
Support:       support@scinet.utoronto.ca or niagara@computecanada.ca
===============================================================================
lclmaoroph@nia-login06:~$

Once you get access, you should change your password using this command on Niagara login node:

ldappasswd  -H ldaps://ldapk9.scinet.utoronto.ca -D "uid=lclmaoroph,ou=People,dc=computecanada,dc=ca" -W -S

After that you MUST set up your SSH keys for login to Niagara

(https://docs.scinet.utoronto.ca/index.php/SSH_keys) and also enable Two-Factor authentication (https://docs.scinet.utoronto.ca/index.php/Two-Factor_setup).

 

  • No labels